Line Marking Removal

Line Marking Removal

Water Jetting Line Removal

Ultra-high-pressure water removes thermoplastic and paint from asphalt with very little surface damage and no dust.

Free Line Marking Removal quote

No obligation. We only use your details to reply about this job.

Water Jetting Line Removal — Line Marking Removal

What's involved

Water jetting is the preferred method for removing thermoplastic from asphalt roads and car parks because it does the least damage to the surface. A truck-mounted unit pumps water at extremely high pressure through a rotating head that lifts the marking away while leaving most of the aggregate in place. A built-in vacuum recovers the water and debris as it goes, leaving the area clean and nearly dry. Because there is no dust, it suits sites near offices, shops and homes. The process is fast, often removing several hundred metres of line per hour on a straight run. Jetting may leave a faint shadow on very old surfaces, but it is generally far less visible than grinding scars. You will need clear vehicle access for a large truck, and the work area must be closed to vehicles and pedestrians while the crew operates.

How we handle it

  1. Survey

    The crew reviews photos or visits the site to identify the surface, marking type and thickness. They confirm which lines are being removed and discuss whether new markings will follow straight away.

  2. Method and quote

    You receive a quote stating the removal method, expected surface finish, working hours and waste disposal. They explain any risk of shadowing or scarring on your particular surface.

  3. Site preparation

    The work area is closed, vehicles or stock cleared and barriers put in place. Lines to be removed are marked up, and dust extraction or water recovery equipment is set up.

  4. Removal

    Markings are removed by jetting, blasting, grinding or planing. The crew checks progress as they go, adjusting pressure or speed to take off the marking without excess surface damage.

  5. Clean-up and handover

    Debris and waste are collected and removed. The surface is checked with you, and any defects found under the old lines are noted. New markings can follow immediately if booked.

Price guide

Line marking removal is usually priced per linear metre for lines and per square metre for hatching, symbols and coloured areas. The method has a big effect on cost, with truck-mounted water jetting more efficient on long runs and grinding better for small areas. Mobilisation and minimum charges apply. These are typical UK guide prices for 2026.

  • Shot blasting removal (concrete): £3–£8 per linear metre. Paint or thin thermoplastic lines on concrete yards and warehouse floors.
  • Water jetting removal (asphalt): £2–£6 per linear metre. Thermoplastic lines on roads and car parks; long runs get the lowest rates.
  • Minimum mobilisation charge: from £450. Covers crew, specialist machine and transport for small jobs.

Questions about water jetting line removal

How much does line marking removal cost?

Water jetting typically costs £2 to £6 per linear metre in 2026, shot blasting £3 to £8, and grinding £4 to £10. Symbols cost £25 to £60 each. Most contractors have a minimum charge from around £450 to cover the specialist machine and crew.

Will line removal damage my surface?

Some surface change is almost unavoidable, but the right method keeps it to a minimum. Water jetting does the least damage on asphalt, while grinding leaves the most visible scar. A good crew will test a small area and explain what finish to expect before starting.

How long does line removal take?

Truck-mounted water jetting can remove several hundred metres of straight line per hour. Grinding is slower, typically 30 to 80 metres per hour. A typical car park layout change can usually be completed in one night, often with re-lining straight afterwards.

Get a free line marking removal quote

Tell us what you need and we'll come back with a clear price.

Request a quote