Line Marking Removal
Grinding and Planing
Diamond grinding and scabbling remove thick or stubborn markings where jetting or blasting cannot, especially on concrete.

What's involved
Grinding uses rotating diamond segments to cut the marking away, while planers use rotating cutters or flails. These methods remove thick thermoplastic, multiple overlapping layers and stubborn epoxy markings effectively, especially on concrete floors and hard-wearing surfaces. The trade-off is surface damage: grinding leaves a visible scar that can look like a line in certain light, particularly on asphalt. Crews use dust extraction connected to the grinder to control silica dust, and wear suitable respiratory protection. Planing is also used as preparation before resurfacing, where surface damage does not matter. On warehouse floors, grinding is often followed by a clear sealer to reduce the visible difference. Allow more time than jetting, typically 30 to 80 metres of line per hour depending on thickness. You should clear the area of stock and equipment and agree a waste removal plan for the arisings.
How we handle it
Survey
The crew reviews photos or visits the site to identify the surface, marking type and thickness. They confirm which lines are being removed and discuss whether new markings will follow straight away.
Method and quote
You receive a quote stating the removal method, expected surface finish, working hours and waste disposal. They explain any risk of shadowing or scarring on your particular surface.
Site preparation
The work area is closed, vehicles or stock cleared and barriers put in place. Lines to be removed are marked up, and dust extraction or water recovery equipment is set up.
Removal
Markings are removed by jetting, blasting, grinding or planing. The crew checks progress as they go, adjusting pressure or speed to take off the marking without excess surface damage.
Clean-up and handover
Debris and waste are collected and removed. The surface is checked with you, and any defects found under the old lines are noted. New markings can follow immediately if booked.
Price guide
Line marking removal is usually priced per linear metre for lines and per square metre for hatching, symbols and coloured areas. The method has a big effect on cost, with truck-mounted water jetting more efficient on long runs and grinding better for small areas. Mobilisation and minimum charges apply. These are typical UK guide prices for 2026.
- Shot blasting removal (concrete): £3–£8 per linear metre. Paint or thin thermoplastic lines on concrete yards and warehouse floors.
- Water jetting removal (asphalt): £2–£6 per linear metre. Thermoplastic lines on roads and car parks; long runs get the lowest rates.
- Minimum mobilisation charge: from £450. Covers crew, specialist machine and transport for small jobs.
Questions about grinding and planing
Is line removal dusty?
Water jetting is dust-free. Shot blasting and grinding produce dust, but professional machines have integrated vacuum extraction that captures most of it. Crews also wear respiratory protection. Tell the crew about nearby air intakes, food areas or sensitive stock so they can plan controls.
Can you remove floor markings in a warehouse?
Yes. Crews use shot blasters, diamond grinders and floor scrapers with dust extraction to remove painted lines, epoxy markings and tape. Work can be done in zones so parts of the warehouse stay operational. Stock and equipment need clearing from the work areas first.
How long does line removal take?
Truck-mounted water jetting can remove several hundred metres of straight line per hour. Grinding is slower, typically 30 to 80 metres per hour. A typical car park layout change can usually be completed in one night, often with re-lining straight afterwards.
Other services
Water Jetting Line Removal
Ultra-high-pressure water removes thermoplastic and paint from asphalt with very little surface damage and no dust.
Shot Blasting
Steel shot blasting removes markings and coatings from concrete and asphalt while leaving a clean, textured surface ready for new lines.
Car Park Layout Changes
Remove old bays, arrows and hatching when a car park is redesigned, so the new layout can be marked cleanly.
Warehouse and Factory Floor Line Removal
Strip old aisle lines, walkways and floor markings before racking changes, new layouts or floor coatings.
Sports Court and Playground Line Removal
Remove faded or unwanted sports and play markings from courts, MUGAs and playgrounds before re-marking.
Grinding and Planing near you
Get a free line marking removal quote
Tell us what you need and we'll come back with a clear price.
Request a quote