Line Marking Removal
Warehouse and Factory Floor Line Removal
Strip old aisle lines, walkways and floor markings before racking changes, new layouts or floor coatings.

What's involved
Warehouse and factory floors often carry years of aisle lines, walkways, bay numbers and hazard markings. When racking moves or processes change, these need removing so forklift drivers and pedestrians are not confused. Crews use small shot blasters, diamond grinders or floor scrapers depending on the marking type, with integrated dust extraction to protect stock, machinery and staff. Epoxy and polyurethane floor paints often need grinding, while tape-based markings can be peeled and residue removed with solvents. On power-floated concrete, the crew aims to remove the marking with minimal change to the floor's sheen. Work can be done in zones so parts of the building stay operational. Allow for barriers between work areas and live aisles. Before the crew arrives, clear pallets and equipment from the areas being treated and make sure forklift routes are diverted.
How we handle it
Survey
The crew reviews photos or visits the site to identify the surface, marking type and thickness. They confirm which lines are being removed and discuss whether new markings will follow straight away.
Method and quote
You receive a quote stating the removal method, expected surface finish, working hours and waste disposal. They explain any risk of shadowing or scarring on your particular surface.
Site preparation
The work area is closed, vehicles or stock cleared and barriers put in place. Lines to be removed are marked up, and dust extraction or water recovery equipment is set up.
Removal
Markings are removed by jetting, blasting, grinding or planing. The crew checks progress as they go, adjusting pressure or speed to take off the marking without excess surface damage.
Clean-up and handover
Debris and waste are collected and removed. The surface is checked with you, and any defects found under the old lines are noted. New markings can follow immediately if booked.
Price guide
Line marking removal is usually priced per linear metre for lines and per square metre for hatching, symbols and coloured areas. The method has a big effect on cost, with truck-mounted water jetting more efficient on long runs and grinding better for small areas. Mobilisation and minimum charges apply. These are typical UK guide prices for 2026.
- Minimum mobilisation charge: from £450. Covers crew, specialist machine and transport for small jobs.
- Hatching and area removal: £12–£30 per square metre. Hatched zones, coloured walkways and large coated areas.
- Symbol or arrow removal: £25–£60 each. Preformed symbols, arrows and text, depending on size and material.
Questions about warehouse and factory floor line removal
How much does line marking removal cost?
Water jetting typically costs £2 to £6 per linear metre in 2026, shot blasting £3 to £8, and grinding £4 to £10. Symbols cost £25 to £60 each. Most contractors have a minimum charge from around £450 to cover the specialist machine and crew.
Will line removal damage my surface?
Some surface change is almost unavoidable, but the right method keeps it to a minimum. Water jetting does the least damage on asphalt, while grinding leaves the most visible scar. A good crew will test a small area and explain what finish to expect before starting.
How long does line removal take?
Truck-mounted water jetting can remove several hundred metres of straight line per hour. Grinding is slower, typically 30 to 80 metres per hour. A typical car park layout change can usually be completed in one night, often with re-lining straight afterwards.
Other services
Water Jetting Line Removal
Ultra-high-pressure water removes thermoplastic and paint from asphalt with very little surface damage and no dust.
Shot Blasting
Steel shot blasting removes markings and coatings from concrete and asphalt while leaving a clean, textured surface ready for new lines.
Grinding and Planing
Diamond grinding and scabbling remove thick or stubborn markings where jetting or blasting cannot, especially on concrete.
Car Park Layout Changes
Remove old bays, arrows and hatching when a car park is redesigned, so the new layout can be marked cleanly.
Sports Court and Playground Line Removal
Remove faded or unwanted sports and play markings from courts, MUGAs and playgrounds before re-marking.
Warehouse and Factory Floor Line Removal near you
Get a free line marking removal quote
Tell us what you need and we'll come back with a clear price.
Request a quote