Line Marking Removal glossary
The terms you'll come across, explained in plain English.
- Blacking out
- Covering old markings with black paint instead of removing them. Cheap but short-lived, and the patch can look like a line.
- Diamond grinding
- Removing markings with spinning diamond-tipped discs that wear the material away. Effective on thick markings but removes some of the surface.
- Dust extraction
- Industrial vacuum units connected to grinding and blasting machines to capture dust at source, essential for indoor work.
- Ghost marking
- A faint trace of an old line left visible after poor removal or painting over, which can confuse drivers in certain light.
- Layer build-up
- Thickness created when lines are repeatedly re-marked over old ones, making removal slower and sometimes needing more than one pass.
- Mobilisation
- Bringing the crew, specialist removal machine and transport to site. Its fixed cost is why small jobs carry a minimum charge.
- Planing
- Removing a thin layer of surface along with markings using a cutting drum, typically used where the surface itself is being reworked.
- Respirable crystalline silica
- Fine dust released when grinding or blasting concrete and asphalt. Exposure must be controlled under COSHH regulations.
- Scabbling
- A forceful removal method using toothed cutters that strike the surface, used on concrete for stubborn markings and coatings.
- Shot blasting
- Removing markings by firing steel shot at the surface. The machine recycles the shot and collects dust, leaving a light, even texture.
- Thermoplastic
- A thick, hot-applied marking material common on roads and car parks. Its thickness and build-up of layers can make removal slower.
- Trial patch
- A small test area where a removal method is tried to check how well it works and how visible the result is before the full job.
- Vacuum recovery
- The suction system on a water jetting unit that collects water and debris as it works, reducing mess and run-off.
- Waste transfer note
- A document recording the transfer of waste to an authorised business, required under the waste duty of care.
- Water jetting
- Removing markings with ultra-high-pressure water through a rotating head, usually from a truck-mounted unit that recovers water and debris as it works.
Get a free line marking removal quote
Tell us what you need and we'll come back with a clear price.
Request a quote