Line Marking Removal

Line Marking Removal

Shot Blasting

Steel shot blasting removes markings and coatings from concrete and asphalt while leaving a clean, textured surface ready for new lines.

Free Line Marking Removal quote

No obligation. We only use your details to reply about this job.

Shot Blasting — Line Marking Removal

What's involved

A shot blaster fires small steel balls at the surface at high speed, abrading the marking away. The shot and debris are pulled back into the machine by a powerful vacuum, the shot is recycled and the dust collected in a filter unit. Shot blasting suits concrete yards, warehouse floors, multi-storey decks and some asphalt surfaces, and is useful when new markings will be applied straight away, because it leaves a textured profile that helps paint and coatings bond. Walk-behind machines cover narrow lines efficiently, while larger ride-on machines strip wide areas such as old hatching or coated walkways. Depth is controlled by adjusting travel speed, so the crew can take off the marking without digging into the surface. A dry surface is needed. Expect light dust, so tell the crew about nearby air intakes, sensitive stock or machinery.

How we handle it

  1. Survey

    The crew reviews photos or visits the site to identify the surface, marking type and thickness. They confirm which lines are being removed and discuss whether new markings will follow straight away.

  2. Method and quote

    You receive a quote stating the removal method, expected surface finish, working hours and waste disposal. They explain any risk of shadowing or scarring on your particular surface.

  3. Site preparation

    The work area is closed, vehicles or stock cleared and barriers put in place. Lines to be removed are marked up, and dust extraction or water recovery equipment is set up.

  4. Removal

    Markings are removed by jetting, blasting, grinding or planing. The crew checks progress as they go, adjusting pressure or speed to take off the marking without excess surface damage.

  5. Clean-up and handover

    Debris and waste are collected and removed. The surface is checked with you, and any defects found under the old lines are noted. New markings can follow immediately if booked.

Price guide

Line marking removal is usually priced per linear metre for lines and per square metre for hatching, symbols and coloured areas. The method has a big effect on cost, with truck-mounted water jetting more efficient on long runs and grinding better for small areas. Mobilisation and minimum charges apply. These are typical UK guide prices for 2026.

  • Shot blasting removal (concrete): £3–£8 per linear metre. Paint or thin thermoplastic lines on concrete yards and warehouse floors.
  • Diamond grinding removal: £4–£10 per linear metre. Thick or layered markings; more surface damage than jetting or blasting.
  • Symbol or arrow removal: £25–£60 each. Preformed symbols, arrows and text, depending on size and material.

Questions about shot blasting

Is line removal dusty?

Water jetting is dust-free. Shot blasting and grinding produce dust, but professional machines have integrated vacuum extraction that captures most of it. Crews also wear respiratory protection. Tell the crew about nearby air intakes, food areas or sensitive stock so they can plan controls.

Can you remove floor markings in a warehouse?

Yes. Crews use shot blasters, diamond grinders and floor scrapers with dust extraction to remove painted lines, epoxy markings and tape. Work can be done in zones so parts of the warehouse stay operational. Stock and equipment need clearing from the work areas first.

How long does line removal take?

Truck-mounted water jetting can remove several hundred metres of straight line per hour. Grinding is slower, typically 30 to 80 metres per hour. A typical car park layout change can usually be completed in one night, often with re-lining straight afterwards.

Get a free line marking removal quote

Tell us what you need and we'll come back with a clear price.

Request a quote